Atosa USA 280 lb Air-Cooled Self Contained Built in Storage Bin Cubed Ice Machine
Ice Maker with Bin, cube-style, air-cooled, production capacity up to 283 lbs/24 hr, 88 lb storage capacity, stainless steel exterior, adjustable leveling legs, ice scoop included, R290, 115v/60/1-ph, 3.1 amps, NSF, ETL, ETL-Sanitation. Includes 3M Water Filtration System and Cartridge Standard Included (ICE140-S). Dimensions 38.6(h) x 23.7(w) x 28.5(d) inches.
Ice Maker with Bin, cube-style, air-cooled, production capacity up to 283 lbs/24 hr, 88 lb storage capacity, stainless steel exterior, adjustable leveling legs, ice scoop included, R290, 115v/60/1-ph, 3.1 amps, cETLus, ETL-Sanitation. Dimensions 38.6(h) x 23.7(w) x 28.5(d) Inches.
Atosa USA YR280-AP-161 283 lb Air-Cooled Ice Machine with Storage Bin
Capable of producing approximately 142 lbs of cubed ice. This Undercounter Air-cooled, Self Contained, Built in Storage Bin ice maker stores up to 88 lbs of ice, which makes it ideal for small bars, hotel lobbies, and office break rooms. Requires a Single phase, 115v/60/1 electrical connection. ENERGY STAR qualified.
- Dimensions: 38.6(h) x 23.7(w) x 28.5(d)
- Up to 283 lbs of ice produced per 24 hours
- Up to 88 lbs of built-in storage capacity
- HALF-DICED CUBED ICE 3/8 (wide) x 7/8 (depth) x 7/8 (height)
- Air-cooled, Self Contained, Built in Storage Bin
- Produces cubed ice
- Slide in door with durable stainless steel exterior
- Ice maker with built in storage
- Single phase, 115v/60/1
- ENERGY STAR Qualified
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
2 Year Warranty: Valid in United States.
All claims for parts or labor must be made directly through Atosa. All claims must include: model number of the unit, the serial number, proof of purchase, date of installation, and all pertinent information supporting the alleged defect. In case of compressor replacement under warranty, either compressor or compressor tag must be returned to Atosa along with above listed information. Failure to comply with warranty policies will result in voiding claims.
Two Year Parts & Labor Warranty
Atosa warrants all new refrigerated components, such as the cabinet and all parts, to be free from defects in materials or workmanship.
Under this warranty is limited to a period of two (2) years from the date of original installation or 27 months after shipment date from Atosa, whichever occurs first. All parts covered under this warranty that are defective within two (2) years of original installation or twenty seven (27) months after shipment date from manufacturer, whichever occurs first, are limited to repair or replacement (including labor charges, of defective parts or assemblies). The labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by Atosa.
Additional Three Year Compressor Warranty
In addition to the two (2) year warranty stated above, Atosa warrants its sealed compressor to be free from defects in both material and workmanship under normal and proper use and maintenance service for a period of three (3) additional years from the date of original installation, but not to exceed five (5) years. Compressors that have been determined to be defective from Atosa within this extended period will be either repaired or replaced with a compressor or compressor parts of similar design and capacity according to Atosa’s discretion. The three (3) year extended compressor warranty applies only to sealed parts of the compressor and does not apply to any other parts or components. This includes, the cabinet, paint finish, temperature control, refrigerant, metering device, motor starting equipment, fan assembly, and other electrical components, etc.
R290 Compressor Warranty
The five-year compressor warranty detailed above will be void i f the following procedure is not carefully adhered to:
1. This system contains R290 refrigerant and lubricant. The lubricant has rapid moisture absorbing qualities.
2. Drier replacement is very important and must be changed when a system is opened for servicing.
3. Micron level vacuums must be achieved to insure low moisture levels in the system.
4. Compressor must be obtained through Atosa, unless otherwise specified in writing, through Atosa’s warranty department.
Ice Maker with Bin, cube-style, air-cooled, production capacity up to 283 lbs/24 hr, 88 lb storage capacity, stainless steel exterior, adjustable leveling legs, ice scoop included, R290, 115v/60/1-ph, 3.1 amps, cETLus, ETL-Sanitation.
38.6(h) x 23.7(w) x 28.5(d) Inches.